Checklist · 17 Nov
A weekly air pressure review you can do on your watch
Approved by the founder
Guide · 6 steps · 1 min read
A barometer that is a few hPa off makes every trend and altitude estimate a little wrong. BaroGuard lets you line it up with a trusted reference in a minute.
1
Find a trusted pressure reference, such as a nearby official weather station reading or a calibrated instrument.
ScreenCalibration screen
Calibrate against a trusted pressure reference or make quick offset adjustments.Quoted from its Google Play page
2
Open BaroGuard and pick the unit the reference uses, hPa/mbar, inHg or mmHg.
ScreenLive pressure with unit setting
View live atmospheric pressure in hPa/mbar, inHg, or mmHg.Quoted from its Google Play page
3
Enter the reference value, or make a quick offset adjustment if you only need a small correction.
ScreenOffset adjustment control
make quick offset adjustmentsQuoted from its Google Play page
4
For altitude, set your current position as zero or enter a known reference altitude.
ScreenAltitude reference screen
Set your current position as zero or enter a known reference altitude.Quoted from its Google Play page
5
Watch the live reading for a minute to make sure it stays steady after the change.
ScreenTrend indicator
See whether pressure is rising, falling, steady, or still collecting enough data.Quoted from its Google Play page
6
Recheck the calibration from time to time, because readings can vary with hardware and conditions.
ScreenLive pressure screen
Results can vary with watch hardware, calibration, altitude changes, weather pressure, sensor behavior, and environmental conditions.Quoted from its Google Play page
Checklist · 17 Nov
Approved by the founder
Story · 17 Nov
Approved by the founder
Guide · 17 Nov
Approved by the founder