answers.delivery

How-to · 2 min read

How to measure the height between two spots with a watch

Sometimes you don't care about your exact altitude, you just want to know how much higher you are than where you started a few minutes ago. Maybe it is the drop from a car park to a lake, the rise of a hill on your usual loop, or how many floors a stairwell really covers. A map gives you a rough number for the big points. It says nothing about the spot you are standing on right now.

Published
17 Nov 2026
Delivery
No. 12
Topic
Personal
Evidence
9 claims quoted from its Google Play page
Review
Approved by the founder

01
Why it's hard

Absolute altitude is hard to get right on a watch, and the error in it can be bigger than the height you are trying to measure. GPS altitude tends to wander, and it can be poor under trees, in a valley or inside a building. Map contour lines only tell you about the terrain in general, not the stair landing or the bend in the path. What you really want is a relative number, a zero where you start and a reading of how far above or below it you are now.

This part describes the usual way. It makes no claims about BaroGuard, so nothing is quoted here.

02
How BaroGuard does it

BaroGuard lets you set your current position as zero, so the altitude it shows becomes a difference from where you stand. It works that out from pressure, using your watch's built-in barometer and your local calibration. If you want more than one number, a vertical-speed session tracks relative altitude, total ascent and descent, and climb rates while the app stays open. Then you can read the result on the watch without a phone or an online service.

Set your current position as zero or enter a known reference altitude.Quoted from its Google Play page
Review relative altitude, duration, total ascent and descent, maximum climb and descent rates, and a compact altitude graph.Quoted from its Google Play page
View approximate pressure-derived altitude using local calibration.Quoted from its Google Play page

03
Step by step

  1. 1Stand at the first spot and open BaroGuard on your watch.
  2. 2Set your current position as zero for estimated altitude, so the starting spot becomes your reference point.
  3. 3Walk, climb or ride to the second spot with the app open.
  4. 4Read the estimated altitude, which now shows how far above or below zero you are.
  5. 5For a longer stretch, start a vertical-speed session instead and check total ascent and descent at the end.
  6. 6Note the result before you leave the app, since sessions are not saved.

04
Tips

Keep the measurement short. Air pressure also moves with the weather, so over a long time a change you see can be weather, not height. A quick walk from one spot to the next gives a cleaner reading than a whole afternoon.

Results can vary with watch hardware, calibration, altitude changes, weather pressure, sensor behavior, and environmental conditions.Quoted from its Google Play page

Keep BaroGuard in the foreground during a session. If you switch to another app or the readings pause, the session ends and you have to start again.

Vertical-speed sessions stop when BaroGuard leaves the foreground or pressure readings pause.Quoted from its Google Play page

Write the number down or take a mental note at the end. The summary is there when the session ends, but it is not kept as workout history.

Session results are not saved as permanent workout history.Quoted from its Google Play page

Pick the unit you think in. Rates show in m/s or ft/min, so you can match whatever your map or trail sign uses.

See current, 5-second, and 30-second rates in m/s or ft/min.Quoted from its Google Play page

05
Questions

Can I make my starting point read zero?

Yes. You can set your current position as zero, or type in a known reference altitude instead.

Set your current position as zero or enter a known reference altitude.Quoted from its Google Play page

Is the height difference exact?

No. Altitude and vertical speed are approximate and can shift with hardware, calibration and weather pressure.

BaroGuard’s readings, trends, alerts, estimated altitude, and vertical speed are approximate.Quoted from its Google Play page

Can I use it as a professional altimeter?

No. It is not a professional altimeter or an aviation instrument.

BaroGuard is not a certified weather station, weather forecast app, storm warning service, emergency alert service, medical tool, professional altimeter, certified variometer, or aviation instrument.Quoted from its Google Play page

More from BaroGuard

All 16 answers