Checklist · 17 Nov
A weekly air pressure review you can do on your watch
Approved by the founder
How-to · 2 min read
On a hike or a ski lift, you often want a rough idea of how high you are, and that is exactly where phone signal and GPS tend to get weak. Map apps that need data go blank, and a GPS fix eats battery while you wait for it. Many people only want a simple height number they can check without pulling out a phone.
GPS altitude is the least precise part of a GPS fix and it can jump around, especially in valleys or under trees. Phone apps that pull elevation from online maps need a connection, which is the first thing to disappear in the mountains. A barometer can estimate height from air pressure, but pressure also changes with the weather, so an uncalibrated reading drifts over the day. Without a way to anchor it to a known point, the number on the screen is hard to trust. And on a long day out, battery matters as much as accuracy. Keeping GPS running just to glance at your height now and then drains a watch quickly, so people end up turning it off and guessing instead, which is exactly when a rough but steady estimate would help.
This part describes the usual way. It makes no claims about BaroGuard, so nothing is quoted here.
BaroGuard estimates altitude from the barometer in your Wear OS watch, using local calibration. You can set your current position as zero at the trailhead, or enter a known reference altitude from a sign or a map before you start. From there it shows approximate pressure-derived altitude without a phone, without location and without internet access. If you want to see how fast you are going up or down, a foreground session adds climb and descent rates, total ascent and descent and a small altitude graph. All of it runs on the watch, and the readings are approximate. The store page lists that results vary with hardware, calibration, weather pressure and conditions, and that it is not a professional altimeter.
View approximate pressure-derived altitude using local calibration.Quoted from its Google Play page
Set your current position as zero or enter a known reference altitude.Quoted from its Google Play page
Recalibrate whenever you reach a point with a known height. Weather changes pressure over the day, and a fresh anchor keeps the estimate close.
General advice. Not a claim about the product.
Use a Tile layout that shows estimated altitude, so you can check it without opening the app.
Use selectable Tile layouts for cached pressure, trend context, mini graphs, or estimated altitude.Quoted from its Google Play page
Remember the Tile shows a cached reading. Open the app when you want a live value.
The Tile and complications use cached local readings and never start continuous background pressure monitoring.Quoted from its Google Play page
Treat it as an estimate for orientation, not for navigation in poor visibility. Carry a proper map for that.
General advice. Not a claim about the product.
No. BaroGuard uses the watch barometer and has no location access.
No locationQuoted from its Google Play page
It is approximate and varies with hardware, calibration, weather pressure and conditions.
BaroGuard’s readings, trends, alerts, estimated altitude, and vertical speed are approximate.Quoted from its Google Play page
No. It is not a professional altimeter or aviation instrument.
professional altimeter, certified variometer, or aviation instrumentQuoted from its Google Play page
Checklist · 17 Nov
Approved by the founder
Story · 17 Nov
Approved by the founder
Guide · 17 Nov
Approved by the founder